Front Disc Brake Conversion Kit converts front drums to 11-5/8" diameter rotors. It includes new spindles, new single piston calipers, brake pads and stainless steel braided brake hoses. Front disc brakes improve your truck's braking ability while providing reliability and all-weather performance.
Front Disc Brake Conversion Kit fits 1966-75 Bronco models with DANA 30 or DANA 44 front axles and will work with 15" or larger wheels. Factory OE locking hubs will not work with this kit. See Mile Marker or WARN locking hubs.
A new brake master cylinder will be needed. Use #45-3587
for manual brakes. Kit requires the use of #40-5420
Combination Valve, #40-3640
Bracket and #36-3778
Socket; sold separately. Some modification is required to the existing steering knuckles to allow clearance for disc brake components. Fabrication of new front brake lines is required. Detailed instructions are included.
Kit contains caliper mounting brackets, 11-5/8" diameter rotors with hubs and bearing races preinstalled, single piston calipers and semi-metallic brake pads, braided brake hoses, attaching hardware and detailed instructions.
Ford 9" Rear Disc Brake Conversion Kit