Steel Lines … Replace Worn Brake, Fuel, Cooling or Transmission Lines

These Steel Lines can be used to replace worn or damaged brake, fuel, cooling or transmission lines and are ready to install with standard inverted flares and fitting nuts on each end. 3/16" and 1/4" lines are supplied with one long and one short fitting. Measure old line to determine size needed.
With a wall thickness of 0.028" (0.70mm) steel lines can withstand pressure up to 17,100 psi and are GM123M-ASV and SAE J527B compliant. Each line features a copper brazed double-walled steel construction with a galvanized zinc coating, offering high resistance to corrosion, vibration, pressure and leakage. Lines can be bent without kinking. Use part #38-1249 Tube Bending Tool.
Measurements of the lines are listed by the outside diameter of the line, the fitting thread size (in parentheses) then the length of the line.
Measurements of fittings and unions are first listed by the outside diameter of line they apply to followed (in parentheses) by their thread size.
Full Parts List