Clutch Components

1983-11 Ranger
1984-90 Bronco II

3-IN-1 CLUTCH KITS

Replace all three clutch pieces at one time: Cover, Disc and Release Bearing. Extend the life of your clutch system and save the hassle of replacing each piece. Buy a 3-In-1 Clutch Kit today to save time and money.

Full Parts List
Part # Description Application Reqd Price Stock Status QTY.
1 50-4016
Clutch Kit "A" 2.0L
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
Rgr 85-87 1 $134.95 In Stock
QTY Required
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
1 50-4012
Clutch Kit 2.0L Rgr 88 1 $139.95 In Stock
QTY Required
1 50-4014
Clutch Kit 2.2L Diesel Rgr 83-84 1 $149.95 In Stock
QTY Required
1 50-4016
Clutch Kit "A" 2.3L
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
Rgr 83-87 1 $134.95 In Stock
QTY Required
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
1 50-4012
Clutch Kit 2.3L Rgr 88-92 1 $139.95 In Stock
QTY Required
1 50-4013
Clutch Kit 2.3L Rgr 93-10/94 1 $139.95 In Stock
QTY Required
1 50-4016
Clutch Kit "A" 2.3L Diesel
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
Rgr BRII 85-87 1 $134.95 In Stock
QTY Required
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
1 50-4016
Clutch Kit "A" 2.8L
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
Rgr BRII 85 1 $134.95 In Stock
QTY Required
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
1 50-4016
Clutch Kit "A" 2.9L
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
Rgr BRII 86-87 1 $134.95 In Stock
QTY Required
  • "A" The 1985-87 Rangers came with a two-piece style release bearing consisting of a short bearing and a steel piston or spacer. This two-piece style release bearing has been replaced by a new one-piece design that eliminates the need for the steel piston or spacer. When replacing the old two-piece style bearing, the piston or spacer must be removed from inside the concentric slave cylinder. If this is not done, the clutch finger will be overstroked and cause slippage and/or noise.
1 50-4012
Clutch Kit 2.9L Rgr BRII 88-92 1 $139.95 In Stock
QTY Required
1 50-4012
Clutch Kit 3.0L Rgr 90-92 1 $139.95 In Stock
QTY Required
1 50-4013
Clutch Kit 3.0L Rgr 93-10/94 1 $139.95 In Stock
QTY Required
1 50-4018
Clutch Kit 4.0L Rgr 90-92 1 $148.95 In Stock
QTY Required
1 50-4020
Clutch Kit 4.0L Rgr 93-97 1 $169.95 Backordered
QTY Required
2 50-4005
Finish:
Plain
Material:
Steel
Finish:
Plain
Material:
Steel
Pilot Bushing w/o 2.2L Diesel 83-11 1 $16.95 In Stock
QTY Required
3 50-4200
Color:
Black
Material:
Plastic
Color:
Black
Material:
Plastic
Alignment Tool w/o Diesel Rgr BRII 83-92 1 $2.95 In Stock
QTY Required
3 50-4202
Color:
Black
Material:
Plastic
Color:
Black
Material:
Plastic
Alignment Tool w/Diesel Rgr 83-84 1 $2.95 In Stock
QTY Required
Close
Part # Description Application Reqd Price Stock Status QTY.

Vehicle Application

Includes Parts for the Following Models:

1983 Ford Ranger 2WD 1984 Ford Ranger 2WD 1985 Ford Ranger 2WD 1986 Ford Ranger 2WD 1987 Ford Ranger 2WD 1988 Ford Ranger 2WD 1989 Ford Ranger 2WD 1990 Ford Ranger 2WD 1991 Ford Ranger 2WD 1992 Ford Ranger 2WD 1993 Ford Ranger 2WD 1994 Ford Ranger 2WD 1995 Ford Ranger 2WD 1996 Ford Ranger 2WD 1997 Ford Ranger 2WD 1998 Ford Ranger 2WD 1999 Ford Ranger 2WD 2000 Ford Ranger 2WD 2001 Ford Ranger 2WD 2002 Ford Ranger 2WD 2003 Ford Ranger 2WD 2004 Ford Ranger 2WD 2005 Ford Ranger 2WD 2006 Ford Ranger 2WD 2007 Ford Ranger 2WD 2008 Ford Ranger 2WD 2009 Ford Ranger 2WD 2010 Ford Ranger 2WD 2011 Ford Ranger 2WD 1983 Ford Ranger 4WD 1984 Ford Ranger 4WD 1985 Ford Ranger 4WD 1986 Ford Ranger 4WD 1987 Ford Ranger 4WD 1988 Ford Ranger 4WD 1989 Ford Ranger 4WD 1990 Ford Ranger 4WD 1991 Ford Ranger 4WD 1992 Ford Ranger 4WD 1993 Ford Ranger 4WD 1994 Ford Ranger 4WD 1995 Ford Ranger 4WD 1996 Ford Ranger 4WD 1997 Ford Ranger 4WD 1998 Ford Ranger 4WD 1999 Ford Ranger 4WD 2000 Ford Ranger 4WD 2001 Ford Ranger 4WD 2002 Ford Ranger 4WD 2003 Ford Ranger 4WD 2004 Ford Ranger 4WD 2005 Ford Ranger 4WD 2006 Ford Ranger 4WD 2007 Ford Ranger 4WD 2008 Ford Ranger 4WD 2009 Ford Ranger 4WD 2010 Ford Ranger 4WD 2011 Ford Ranger 4WD 1986 Ford Bronco II 2WD 1987 Ford Bronco II 2WD 1988 Ford Bronco II 2WD 1989 Ford Bronco II 2WD 1990 Ford Bronco II 2WD 1984 Ford Bronco II 4WD 1985 Ford Bronco II 4WD 1986 Ford Bronco II 4WD 1987 Ford Bronco II 4WD 1988 Ford Bronco II 4WD 1989 Ford Bronco II 4WD 1990 Ford Bronco II 4WD

Choose Your Vehicle